Introduction

Vertical combination crusher can crush large materials, and the discharging granularity can be adjusted at will without the influence of the abrasion of the board hammer and lining plate. It adopts the no-grizzly-bar structure to avoid blocking, which is suitable to crush materials with much moisture and silt content.


Working principle:
Materials fall into the high speed spinning impeller from the top of the machine, and get crashed and crushed at high speed with the other materials spreading around the impeller in an umbrella shape under the high speed centrifugal action. After materials hit each other, they get further crashing, grinding and crushing in eddy current between the impeller and the chassis. Then they are discharged from the bottom barrel, forming multiple closed circuit recycling process. The finished product particle size is controlled by the screening machine.

Advantages：Inquiry > >

　　1. The structure is very simple and reasonable, and the operating cost is low. The working principle is stone hit stone, and the abrasion is small.
　　2. The crushing ratio is very high and energy saving.
　　3. Vertical compound crusher has fine and coarse crushing.
　　4. The moisture can be up to 8%, and the noise level is less than 75db.
　　5. It is suited for middle hard material.
　　6. The finished product is cubic, and the density is big, and the pollution is very small.
　　7. The finished product is cubic, the density is big and the iron pollution is very small.
　　8. The abrasion of impeller is very small, and easy to maintain