Overflow ball mill-BAILING® Machinery

Overflow ball mill

Feeding size≤25mm
Capacity:0.65-90t/h
It is widely used in ore beneficiation plants, cement industry, refractory industry, chemical industry, etc.The overflow type ball mill is used to grinding materials in wet condition. Compared with dry process ball mill, the biggest difference is --- its end cover is cone shaped. On the end cover there is only one wave lining plate. The biggest advantage is that it can dress low grade magnetic iron ore with high-precision.

Get Price Send Message

Introduction

The main component of wet overflow ball mill is a cylinder with bigger diameter and smaller length which is revolved by transmitting machinery. Materials are put in cylinder through the feed opening and then thoroughly grinded. The falling course of iron balls and ores can produce huge falling impact and autogenous grinding. The continuous feeding of ores can create considerable pressure to make ores move from feed opening toward discharge opening. Finally, acceptable particles are discharged from the discharge opening. Hollow shaft with the anti-spiral blade returns the steel ball and the coarse ore block.

Advantages：Inquiry > >

　　1. Adopt large diameter double roller bearings. It is easy to maintain and has high efficiency.
　　2. Adopt cone structure around the discharging part, which makes ball mill stable. It can grind the materials more fine because the diameter of steel ball is very small.
　　3. Adopt the whole steel frame and the precision of installation is very high.
　　4. The equipment works stably, reduces downtime and maintenance, and improves the efficiency. The ball mill adopts drum feeder instead of joint feeder and does not have inertial impaction.

Technical Parameters:Inquiry > >

Type	Cylinder speed (r/min)	Weight (t)	Feeding size (mm)	Particle size (mm)	Capacity (t/h)	Motor power (kw)	Weight (t)
Ф900×1800	36～38	1.5	≤20	0.075-0.89	0.65-2	18.5	4.6
Ф900×3000	36	2.7	≤20	0.075-0.89	1.1-3.5	22	5.6
Ф1200×2400	36	3	≤25	0.075-0.6	1.5-4.8	30	12
Ф1200×3000	36	3.5	≤25	0.074-0.4	1.6-5	37	12.8
Ф1200×4500	32.4	5	≤25	0.074-0.4	1.6-5.8	55	13.8
Ф1500×3000	29.7	7.5	≤25	0.074-0.4	2-5	75	15.6
Ф1500×4500	27	11	≤25	0.074-0.4	3-6	110	21
Ф1500×5700	28	12	≤25	0.074-0.4	3.5-6	130	24.7
Ф1830×3000	25.4	11	≤25	0.074-0.4	4-10	130	28
Ф1830×4500	25.4	15	≤25	0.074-0.4	4.5-12	155	32
Ф1830×6400	24.1	21	≤25	0.074-0.4	6.5-15	210	34
Ф1830×7000	24.1	23	≤25	0.074-0.4	7.5-17	245	36
Ф2100×3000	23.7	15	≤25	0.074-0.4	6.5-36	155	34
Ф2100×4500	23.7	24	≤25	0.074-0.4	8-43	245	42
Ф2100×7000	23.7	26	≤25	0.074-0.4	8-48	280	50
Ф2200×4500	21.5	27	≤25	0.074-0.4	9-45	280	48.5
Ф2200×6500	21.7	35	≤25	0.074-0.4	14-26	380	52.8
Ф2200×7000	21.7	35	≤25	0.074-0.4	15-28	380	54
Ф2200×7500	21.7	35	≤25	0.074-0.4	15-30	380	56
Ф2400×3000	21	23	≤25	0.074-0.4	7-50	245	54
Ф2400×4500	21	30	≤25	0.074-0.4	8.5-60	320	65
Ф2700×4000	20.7	40	≤25	0.074-0.4	12-80	400	94
Ф2700×4500	20.7	48	≤25	0.074-0.4	12-90	430	102
Ф3200×4500	18	65	≤25	0.074-0.4	According to technological conditions	800	137

Recommend Products: Inquiry > >

Solutions and Cases

more >>

Sand production line
Stones are conveyed via the vibrating feeder to the jaw crusher for rough crushing process and then they are crushed further through the sand making equipment..
Powder production line
The powder production line is mainly used to process the non-flammable and non-explosive materials with the mohs grade lower than eight such as feldspar,

Send Message

Dear friend, thanks for your interest in Bailing brands product. Any equipment you need, pls feel free to contact our sales engineer. We will contact you within 24 hours. If you have urgent requirement, pls send inquiry to sales@bljq.com, or call +86 18203639337, or +86-371-66888887.